Products

HUMAN BODY VOLATGE CHECKER (Model: SC-01)

Human-Body-Voltage-Checker Human body voltage checker is a new and unique visual method of detecting how much static charge a person is carrying. The unit can be wall mounted outside the ESD protected area to avoid charged persons unknowingly entering.

The meter must always be grounded to produce an accurate measurement. But more importantly to allow the operator to discharge to a safe handling limit. Touch the Touch to test, and watch the LIQUID CRYSTAL DISPLAY indicated between 0 to 1999V of the static charge +/- Polarity. Specifications :

Power Supply : 9V Battery
Accuracy : +/- 10%
Resolution : 1 Volt
Low Battery Indication : By LCD Display
Test Actuation : Touch To Test
Dimensions : 135 x 70 x 25 mm
Weight : 150 Gms (with battery)
Calibration : Recommended every 12 months
Warranty : 12Months
Accessories : 1Meg Ohm Ground Cord, Instruction Board & Carry Case

Application :

  • Static checker can be used to detect how much static a person is carrying.
  • Will indicate if wrist straps and coil cords are functioning, ground leads, bounding plugs, heel straps, custom floors, Static Spray Coating, etc

 

 

 

HUMAN BODY VOLTAGE CHECKER (Model: SC-02)

25 -Human-Body-Voltage-Checker _With-Hazard Alarm_ (2) Human Body Voltage Checker is a new and unique visual method of detecting how much static charge a person is carrying. The unit can be wall mounted outside the ESD protected area to avoid charged persons unknowingly entering, or used by operators to periodically check that they are not creating a charge within the protected area.

It is very simple to use and only requires the personnel under test to touch the plate on the instrument and directly read the charge level on the meter. Apart from the measuring the charge, it can also be used to safely drain away the charges Existing on the body.

It has a feature of visual and audible warning when it detects voltage over a certain threshold. Important Instructions : The instrument must always be connected to ground; not grounding the unit can result in inconsistent results. The circuit will only become responsive when you offer a path to ground. Application :

  • Human Body Voltage Checker can be used to detect how much static a person is carrying.
  • Human Body Voltage Checker will audit any potential static generator or dissipater, like. Wrist straps, heel grounders, toe straps, static safe shoes, chairs, floor mats, ground leads, purpose built floors, garments, static sprays, floor finishes, etc....

SC-02 Specifications

Dimension : 180 X 100 X 45 MM
Weight : 300 Grams (With battery)
Indicating Range : +/- 1999V
Display : 3 1⁄2 Digit LCD Display
Resolution : 1 Volt
Accuracy : 10%
Test Surface : S.S. Plate
Power Supply : 9V Battery
Calibration : Recommended once in 12 months
Warranty : 12 Months
Accessories : Instruction Board with Instrument Fixing Clamp & 1 Meg Ohms Molded Grounding Cord.

 

 

 

Specification for ESD Work Stations
Frame material 40 X 40 X 2mm Thick MS Powder coated
  • ESD / Conductive Powder coating Optional
  • There will not be any sharp edges
  • Leveling bush / Wheels at the bottom of the table for leveling
  • The design of frame will be such that it can be handled /lifted with the single fork lift
Table Top – ESD Laminated with Edge binding / Post forming
  • Size : 1500 X 750 X 25 mm also Made as per the customer requirements
  • Provision for height adjustment is available
  • Cable Manager Holes are Provided
  • Provisions for ESD Grounding cards are provided
  • Double side working provision is also available
Storage Rack / Shelf -1
  • ESD Laminated with Edge binding / Post forming
  • Size : 1500 X 400 X 25 mm also Made as per the customer requirements
  • Provision for height adjustment is available
  • Cable Manager Holes are Provided
  • Provisions for ESD Grounding cards are provided
  • Double side working provision is also available
04 Storage Rack / Shelf -2
  • ESD Laminated with Edge binding / Post forming
  • Size : 1500 X 300 X 25 mm also Made as per the customer requirements
  • Provision for height adjustment is available
  • Cable Manager Holes are Provided
  • Provisions for ESD Grounding cards are provided
  • Double side working provision is also available
Drawer Unit
  • Modular Drawer unit material prelam board / MS Powder coated / ESD Powder Coated
  • 400 width X 600 Depth X 500 Height
  • 3 drawers with individual locks
  • One Drawer with one cupboard
  • Also available as per the customer requirements

PC Shelf

  • Provision to house a CPU at the bottom of the table

Key Board Tray

  • Plastic / MS Powder coated
  • With / without Mouse Pad

LCD Monitor Clamp

  • To suit monitors with mounting holes at 75 / 100mm pitch centers
  • Turns through a radius of 180 Degree

ESD Ground Point is provided below the table
Common Point Ground for Wrist Strap Connection

  • One / Two as per the customer requirements
  • Work station Monitor is also provided

Electrical Panel

  • It is made of MS Powder coated as per the customer required dimensions
  • MCB 16 Amps Single Pole / Double Pole
  • LED Power Indicator Lamp
  • 1 Switch For tube light
  • Modular Sockets 5/15 Amps universal
  • Modular Sockets 5 Amps Indian Sockets
  • Modular Sockets 13 Amps intel
  • Modular Switches 5 Amps / 15 Amps
  • 3 Phase MCB / Socket / Plug can be provided
  • 15 Amps / 5 Amps top with 3 core wire is provided
  • As per the customer requirements

Pin up Board / white Board

  • As per the customer requirements

Bin Holder

  • Provision to keep the bins as per the customer requirements

Provision For Data & Voice as per the customer requirements
Provision is provided to fix the magnifiers